
Ecostar Gazoram GRM gas burners.
Nozzle-mix process gas burners with a wide modulation range — for direct-fired furnaces, dryers and drying machines. Natural gas or LPG, 7 sizes, approx. 5–1,160 kW.
Gazoram (GRM) is a series of Ecostar process gas burners. Gas and air mix only at the burner nozzle (nozzle-mix), so the burner runs steadily across a wide power range — from a low flame to full load.
What the GRM burner looks like
Gazoram GRM 60 in the manufacturer's renderings. Click a picture to enlarge it.






Design and equipment
- Fuel: natural gas or LPG, gas pressure upstream of the burner 21–50 mbar.
- Nozzle-mix — a stable flame in furnaces and dryers with a stabilised combustion-chamber pressure.
- Modulating output — a servomotor with mechanically linked air and gas dampers keeps the gas-to-air ratio right across the whole operating range.
- Flame monitoring by ionisation, optionally by photocell.
- Supplied complete: electromagnetic safety and operating valve, control relay, gas pressure switch, air pressure switch, manometer and ball valve.
- Power supply 1N 230 V or 3N 400 V, 50 Hz. The burners are made to EN 746-2 (safety of industrial thermoprocessing equipment).
Models and outputs
| Model | Max. output [kW] | Max. output [kcal/h] | Max. natural gas consumption [Nm³/h] |
|---|---|---|---|
| GRM 15 | 174.4 | 150,000 | 18.2 |
| GRM 30 | 348.8 | 300,000 | 36.4 |
| GRM 40 | 465.1 | 400,000 | 48.5 |
| GRM 60 | 639.5 | 550,000 | 66.7 |
| GRM 70 | 814.1 | 700,000 | 84.8 |
| GRM 80 | 872.1 | 750,000 | 90.9 |
| GRM 100 | 1,162.7 | 1,000,000 | 121.2 |
Applications
- Textile drying machines and stenters — also when converting from thermal oil or steam heating to gas.
- Printing machines.
- Drying and curing ovens.
- Firing kilns.
- Indirect air heating.
- Food processing and baking.
- Tempering and aluminium homogenising.
GRM or FPB?
We choose GRM for simpler gas installations up to approx. 1.2 MW. When oil or dual fuel, a higher operating temperature, more power (up to 5.8 MW) or a multi-burner system is needed, FPB process burners are the better choice.
What to prepare for an enquiry
- Type of equipment and process: furnace, dryer, drying machine, required temperature.
- Required output (kW or kcal/h) or the data from the nameplate of the existing burner.
- Fuel (natural gas or LPG) and gas pressure upstream of the burner.
- Combustion-chamber pressure and control method (e.g. temperature control, signal from the automation).
- A few photos of the mounting point and the existing installation.
Send us the data from the boiler or furnace nameplate — we will size the burner.
Power, fuel, combustion chamber pressure. We reply within 48 hours, with no obligation.